Trunk
Engine
Board
 

ABOUT CNG
VEHICLE

To convert a vehicle to CNG and guarantee up to a 60% reduction in relation to other fuels like gasoline or diesel, it is necessary to get acquainted with the equipment that will be installed in your vehicle by authorized shops.

Get to know with the conversion kit to be installed in your vehicle:

• Engine
• Board
• Trunk

See how a vehicle converted to CNG works.

CNG CYLINDER

  Stores CNG. Manufactured of seamless steel they are prepared to operate with pressure levels ranging from 200 kgf/cm² to 250 kgf/cm².
CYLINDER VALVE
  Installed at the cylinder gas outlet. Has safety devices for over pressure and quick closing.
CONNECTION TUBES
  Hard high pressure tubes connect the CNG cylinder to the engine.
PRESSURE REGULATOR
  It regulates pressure of CNG to the engine and has different regulating stages. Through these stages the cylinder pressure, varying according to consumption, is regulated to a steady and unique pressure for the operation of the engine.
DISPLAY LEVEL OF COMBUSTIBLE SELECTION INDICATOR
  Operates combustible changes electrically from the interior of the vehicle. Indicates CNG level available in the storage cylinder of the vehicle.
FILLING VALVE
  Multi-valve with quick closing supply device, that keeps CNG stored in the cylinder. Through this valve the vehicle is refueled with CNG.
PRESSURE GAUGE
  It is a pressure indicator installed between the supply valve and pressure regulator to permanently measure and show cylinder CNG pressure. The amount of gas in the cylinder is in close relation to pressure, therefore the pressure gauge sends a signal and indicates on the panel the amount of CNG available.
   
Recommend Aspro | Site Map | Terms and conditions | Privacy Statement | Copyright Aspro © 2007
Compressed natural gas / CNG Transport / CNG Refueling station / CNG Compressor / CNG Dispenser